| |
|
 |
| |
| Aerated Concrete Equipment Series
|
| Aerated Concrete hydrochloride is a silicon products, and there are close to 100 years abroad the history of our country to introduce the metal have nearly 40 years of history, its production process and equipment matures. Bulk density of aerated concrete light, noise, thermal insulation properties, and the advantages of Machinable. There A3.5 to A10 multi-level intensity, and the wall at different levels need to adapt. Production of raw materials rich. Especially on the fly ash, slag, sand, volcanic and other siliceous material as raw material, both comprehensive utilization of industrial wastes, controlling environmental pollution, the protection of arable land, but also social and economic benefits achieved bumper is replaced traditional clay the ideal wall materials, and the national wall materials innovation, tax and environmental policy and strong support and vast market development prospects. |
Breaks off the trigger
|
Main Features of the Machine:overturning in accordance with
1) The structure of the machine is simple and practical , it is easy to install and maintain.
2) After overturning, the blank stands vertically with the width of 60mm and the height of 1200mm,thus the cutting wire can be shorter and it is not easy to be broken and drifted, the cutting precision can be more exactly as well.
3) When the blank is moving along with the cutting cart ,the vertical cutting is done by the vertical cutting device which is fixed .The horizontal cross cutting device is driven by the chain which can keep the cross cutting support running consistently when it is rising or falling, thus it can ensure the cutting precision.
4) As the blank stands vertically ,the grooves on both sides of the blank (with width of 600mm )can be milled at the same time when the blank is cut vertically ,no groove processing device is needed;
5) The machine can produce both building blocks and slabs and the blank can be cut into six sides , therefore the quality of products can not be influenced by the mould oil and the deformation of the mould;
6) The machine is easy to operate. The cutting process of the machine (overturning , vertical cutting and cross cutting ) can be finished in different positions ,therefore the operation is simplified and the maintenance is convenient.
|
|
|
|
|
 |
| QQ Online conversation |
 |
 |
|
|
|
| Tel：86-0371-64392923 64358039 |
| Fax：86-0371-63236575 |
| Concrete Blocks Department： MANAGER FENG |
| Phone：13803830998 |
| E_mail： qkj@gyyuli.com |
Precast Slabs Department：
MANAGER BAI |
| Phone：13939079056 |
| E_mail： yzk@gyyuli.com |
| Aerated Concrete Equipments Department： MANAGER LI |
| Phone：13703980385 |
| E_mail： jqk@gyyuli.com |
| Website ：www.gyyuli.com |
| Address： DUFU xiangbei Peace Road 200Meters of GONGYI CITY |
|
|
|
|
